[CTUAA] Fwd: Qualcomm urgent job positions - 海外工作
By Elvira
at 2011-03-30T08:50
at 2011-03-30T08:50
Table of Contents
看標題應該蠻清楚啦 就是交大校友會的群組有某學長要找人
不是我喔 只是分享資訊而已
========================================================
[CTUAA] Fwd: Qualcomm urgent job positions
High pay job in San Diego.
Please E mail your resume to [email protected].
Candidate Requirements
Posting Title Bench Test Engineer - Analog/PMIC/RF/Mixed Signal
Job Function Entry level Engineer to all levels of Sr Engineer
(ie. Sr, Staff, Sr Staff, Principal)
QUALCOMM CDMA Technologies (QCT) is the world leader in supplying
integrated circuit solutions for cellular wireless standards and
is the number one fabless semiconductor company in the world. The
key to QCT's success is the ability to deliver to our customers
complete optimized wireless platforms incorporating protocol,
hardware, software and support, with high quality, on schedule.
The RF/Analog organization within QCT develops all RF, mixed-signal
, and analog ICs for these complete wireless platforms. In order to
drive our next phase of growth in cellular, wireless peripherals
and 4G, we are expanding our RF/Analog Product Development and Test
Engineering group. The RF/Analog Product Development and Test
Engineering group develops test solutions for design verification
of highly integrated RF receivers/transmitters/transceivers, power
management, analog and mixed signal ASICs designed by QCT.
Job responsibilities for this position include design and debug of
test interface hardware, test methodology implementation, test
equipment automation, and device verification/characterization.
Skills/Experience Understanding of electrical engineering concepts
and circuit solving skills. Working knowledge of power management
, analog, or RF and general communication measurements (ie line/load
regulation, PSRR, transition time, amplifier efficiency, jitter,
phase noise, etc). Able to work with common test equipment
(oscilloscope, spectrum analyzer, time interval analyzer, logic
analyzer, network analyzer, etc). Capable of understanding and
modifying LabVIEW test software. Knowledge in mixed-signal or analog
PCB design including CAD interface. Test board design, debug, and
development. Ability to communicate clearly, organize effectively
and document work thoroughly. Familiarity with cellular standards
such as CDMA2000, 1X-EVDO, WCDMA, UMTS, GSM/GPRS/EDGE, or wireless
peripheral standards such as 802.11x WLAN or other OFDM-based systems,
GPS, and Bluetooth is desirable.
Responsibilities
Educational Requirements Bachelor's degree in Electrical Engineering
required. Master's degree in Electrical Engineering preferred.
--
不是我喔 只是分享資訊而已
========================================================
[CTUAA] Fwd: Qualcomm urgent job positions
High pay job in San Diego.
Please E mail your resume to [email protected].
Candidate Requirements
Posting Title Bench Test Engineer - Analog/PMIC/RF/Mixed Signal
Job Function Entry level Engineer to all levels of Sr Engineer
(ie. Sr, Staff, Sr Staff, Principal)
QUALCOMM CDMA Technologies (QCT) is the world leader in supplying
integrated circuit solutions for cellular wireless standards and
is the number one fabless semiconductor company in the world. The
key to QCT's success is the ability to deliver to our customers
complete optimized wireless platforms incorporating protocol,
hardware, software and support, with high quality, on schedule.
The RF/Analog organization within QCT develops all RF, mixed-signal
, and analog ICs for these complete wireless platforms. In order to
drive our next phase of growth in cellular, wireless peripherals
and 4G, we are expanding our RF/Analog Product Development and Test
Engineering group. The RF/Analog Product Development and Test
Engineering group develops test solutions for design verification
of highly integrated RF receivers/transmitters/transceivers, power
management, analog and mixed signal ASICs designed by QCT.
Job responsibilities for this position include design and debug of
test interface hardware, test methodology implementation, test
equipment automation, and device verification/characterization.
Skills/Experience Understanding of electrical engineering concepts
and circuit solving skills. Working knowledge of power management
, analog, or RF and general communication measurements (ie line/load
regulation, PSRR, transition time, amplifier efficiency, jitter,
phase noise, etc). Able to work with common test equipment
(oscilloscope, spectrum analyzer, time interval analyzer, logic
analyzer, network analyzer, etc). Capable of understanding and
modifying LabVIEW test software. Knowledge in mixed-signal or analog
PCB design including CAD interface. Test board design, debug, and
development. Ability to communicate clearly, organize effectively
and document work thoroughly. Familiarity with cellular standards
such as CDMA2000, 1X-EVDO, WCDMA, UMTS, GSM/GPRS/EDGE, or wireless
peripheral standards such as 802.11x WLAN or other OFDM-based systems,
GPS, and Bluetooth is desirable.
Responsibilities
Educational Requirements Bachelor's degree in Electrical Engineering
required. Master's degree in Electrical Engineering preferred.
--
Tags:
海外工作
All Comments
By Annie
at 2011-04-01T13:49
at 2011-04-01T13:49
Related Posts
[亞洲] 常駐泰國&緬甸人才
By Edward Lewis
at 2011-03-29T16:56
at 2011-03-29T16:56
verification engineer @ Xilinx
By Bennie
at 2011-03-29T15:50
at 2011-03-29T15:50
Job Opportunities (LinkedIn)
By Liam
at 2011-03-29T14:52
at 2011-03-29T14:52
補稅的地址
By Edward Lewis
at 2011-03-29T11:57
at 2011-03-29T11:57
Job Opportunity in Microsoft(Mountai …
By Daph Bay
at 2011-03-29T10:20
at 2011-03-29T10:20