MAKINO-新加坡 企業求才資訊 - 海外工作
By Edwina
at 2018-11-05T21:51
at 2018-11-05T21:51
Table of Contents
公司網站:https://www.makino.com.sg/
聯繫人:Mr. Patrick Tan Wee Phin
[email protected]
LIST OF JOB VACANCIES @ MA
Job Title : Technician
Department : Production Assembly
Hiring Personnel : Ng Huai Han
Key Responsibilities:
‧ Ensure the assembled machines are within the company quality standard.
‧ Able to interpret, measure, and troubleshoot electrical circuits and
system.
‧ To install, maintain and troubleshoot pneumatic and hydraulic system.
‧ To route and connect the cables according to quality standard.
‧ Perform good standard cable crimping and soldering.
‧ To operate basic operation of CNC control precision machine.
‧ Ensure that all machine tools are proper taken care and calibrated
‧ Ensure that the standard time set by process engineer is met
‧ Carry out duties in accordance with Quality Policy, EHS control
procedures and WIS
Job Requirements:
‧ NTC2/3/NITEC/ITC or equivalent in Electrical and Electronic/ Mechanical
Engineering
‧ ‘O’ level / SPM with 1 year experience in CNC Machine or related
electrical experience may be considered
‧ Have basic analysis and troubleshooting skill of hydraulic, pneumatic
system / electrical circuit diagram
Job Title : Engineer
Department : Production Engineering
Vacancies : 1
Hiring Personnel : Chow Ji Feng
Key Responsibilities:
‧ Productivity improvement through process and automation design
‧ Design of electrical assembly process: MBOM, process manual, check
sheet, fixture, tooling
‧ Prepare and structure Engineering BOM to Process BOM for assembly
purpose
‧ Investigate and provide report due to part failure
‧ Implement preventive actions to improve quality
‧ Design and Develop simulator and testing jig for function checks
‧ Support Production in documentation, clarification, training and
troubleshooting
Job Requirements:
‧ Candidate must possess at least a Diploma in Engineering or equivalent
‧ Candidate with automation design and manufacturing process experience
are welcome to apply
‧ Good sense of engineering design, analysis and engineering logical
judgement
‧ Should be a good team player and quick learner
Job Title : Automation Engineer
Department : Production Engineering
Hiring Personnel : Chow Ji Feng
Key Responsibilities:
‧ Identification of new opportunities for automation within the
manufacturing process
‧ Management of a project team (including managing vendors)
‧ Designing new automation equipment or processes
‧ Stimulating and testing these processes or equipment to ensure they
function as desired
‧ Writing reports for senior colleagues outlining new concepts, testing
outcomes and ongoing efficiency
‧ Developing and maintaining clear and accurate documentation of
automation equipment or processes
‧ Staff training where necessary – typically after implementing new
processes or equipment or making changes to existing ones
‧ Troubleshooting automated processes or equipment when errors occur
Job Requirements:
‧ Candidate must possess at least a Degree in Engineering
(Mechanical/Mechatronics) or equivalent. Entry level candidates with relevant
degree can be considered.
‧ Experience in automation is preferred.
‧ Experience in programming new automated components to the manufacturing
process is a plus point.
‧ Should be a good team player and quick learner.
‧ Willing to travel and attach to regional company for short period.
Job Title : Procurement Officer
Department : Purchasing
Vacancies : 1
Hiring Personnel : Low Seow Wah
Key Responsibilities:
‧ In-charge of standard component or sheet metal/fabrication or machining
component procurement
‧ Handling of RFQ and technical query from supplier on technical
specification from supplier
‧ Ability to assess supplier capability and capacity
‧ Visiting suppliers, working closely with QC team on qualifying the
suppliers
‧ Reporting cost saving, rejection replacement status of parts
‧ Coordination with department for internal processing. EG: Painting and
Assembly if required
‧ Negotiate and choose the right price
Job Requirements:
‧ Diploma in Mechanical/Precision/Tool & Die or related Engineering
disciplines
‧ Good technical knowledge in mechanical commodity
‧ A team player, self-motivated and able to work under pressure with a
sense of urgency
‧ Meticulous, independent and positive attitude
‧ Good communication skills
‧ Proficient in Microsoft applications and ERP/SAP systems
Job Title : Electrical Engineer
Department : Research and Development Shared Engineering
Vacancies : 1
Hiring Personnel : Kulkarni Avinash Divakar
Key Responsibilities:
‧ Electrical and mechatronic design
‧ 3D layouting of cabinets and electrical subassemblies
‧ circuit diagrams/ cable-drawing creation for manufacturing and assembly
‧ creation of bill of materials and Engineering Changes
‧ Analysis and support on customer service issues
‧ Analysis and support on production issues
‧ Proposal design for new electrical unit for next generation machines
‧ Knowledge of PLC based electrical cabinet design
‧ Engineering and design for customer specific solutions
‧ solve engineering problem at our customer sites
Job Requirements:
‧ Electrical and Mechatronics design
‧ 3D layouting of cabinets and electrical subassemblies
‧ circuit diagrams/ cable-drawing creation for manufacturing and assembly
‧ creation of bill of materials and Engineering Changes
‧ Analysis and support on customer service issues
‧ Analysis and support on production issues
‧ Proposal design for new electrical unit for next generation machines
‧ Knowledge of PLC based electrical cabinet design
‧ Engineering and design for customer specific solutions
‧ solve engineering problem at our customer sites
_____________________________________________________________________________________________________
Job Title : Software Engineer
Department : Design & Development EDM
Vacancies : 2
Hiring Personnel : Jason Wan
Key Responsibilities:
‧ Responsible for developing Makino’s next generation controller and
related products
‧ Responsible for programming in both user interface design and machine
logic.
‧ Understanding the requirements, design, implementation, integration,
testing, verification and maintenance of Makino’s software products
‧ Be accountable for optimization-focused design that practices well
written codes that are easily readable, highly reusable and modular. Coding
convention and design tools will conform to Makino’s software standard
practices.
‧ Provide technical design documentation that fully defines all
application codes and the underlying methodology for each design decisions
made.
‧ Perform troubleshooting of client problems both remotely and onsite.
Overseas travel may be required.
Job Requirements:
‧ Degree in Software Engineering or Computing
‧ Able to program in WPF, C#, C++\
‧ Be familiar with at least two of the following languages: WPF, C#, C++,
Java, Javascripts, and XML.
‧ Have good knowledge in OOD/OOP design and are able to incorporate them
into their designs.
‧ Experience in the following tools will be preferred: Visual Studio,
Expression Blend, Adobe Photoshop, Solidworks 3D and SQLServer.
‧ Have keen interests in system testing
_________________________________________________________________________________________________________
Job Title : Senior / Software Engineer
Department : Design & Development Milling
Vacancies : 1
Hiring Personnel : William Goh
Key Responsibilities:
‧ Responsible for developing and maintaining Windows based applications
for PC, Mobile devices and Makino proprietary products.
‧ Manage requirements, deliverables and schedule, ensuring clear
communication internally and with customers based on SCRUM methodology.
‧ Setup where required, tools and systems to facilitate track and improve
team communication and efficiency.
Job Requirements:
‧ Engineering Graduate in IT / Computer Science
‧ Knowledge of C#, WEB, WPF, Winform application development.
‧ Experience in Windows Embedded Standard OS.
‧ Experience in software architecture design and software unit testing.
‧ Experience in developing interfaces to SAP.
‧ Experience managing software teams using agile scrum development
techniques and tools.
‧ Good knowledge of software development life cycle, object orientated
design and UML diagram design.
‧ Experience in the following tools: Git source control, Visual Studio,
SQLServer, MongoDB, Jenkins CI.
_________________________________________________________________________________________________________
Job Title : Assistant Engineer / Engineer
Department : DM Application
Vacancies : 2
Hiring Personnel : Daniel Nauer
Key Responsibilities:
‧ Conduct basic operation training for customers.
‧ Execute test cuts to support sales
‧ Support customers in the usage of their machines after installations
‧ prepare, document and conduct technical seminars
‧ conduct internal trainings to colleagues from other regions and
departments
‧ prepare process analysis and optimization strategies
Job Requirements:
‧ Diploma in Precision Engineering, Mechanical Engineering or similar or
Higher Nitec with 2 years industry experience involving machining or
experience as application engineer
‧ Ability to converse/write in mandarin is a plus
‧ Knowledge of 5 axis milling application and programming is a plus
‧ knowledge of operation of WEDM is a plus
_________________________________________________________________________________________________________
Job Title : Engineer (Industrial IoT)
Department : Digitalization & Analytics
Vacancies : 1
Hiring Personnel : Lim Chee Wang
Key Responsibilities:
‧ Carry out development in Sensor-Based Industrial IoT implementation for
Production Operation
‧ Source, evaluate and select suitable sensors or tracking technologies
to achieve effective Production Improvement applications
‧ Develop sensor software interface, data processing and algorithm to
realize operational objectives
‧ Work with other engineers and or department members to carry out system
integration, testing and delivers effective production improvement
applications
‧ Provide technical support to Manufacturing & Service for technologies
developed by the team
Job Requirements:
‧ Bachelor/Master Degree in Computer Engineering/Science, Electrical &
Electronics, Mechatronics Engineering or Equivalent
‧ Practical experience in working with any type of sensors (such asRFID,
iBeacon, UWB, Proximity, Accelerometers, etc) implementation.
‧ Familiar with IIoT protocol (OPC-UA, MQTT, Zigbee)
‧ Good Programming skills in (C#, NET, Python) and knowledge in network/
internet related programming (TCP/IP, HTTP)
‧ Familiar with various structured and unstructured data formats (XML,
JSON, CSV etc)
‧ Experience with various type of databases (SQL and NoSQL)
‧ Development experience in Industrial IoT, Data analytics and or other
cloud functionalities (Azure/ AWS) will be an advantage
‧ Able to learn independently and adapt rapidly to different programming
environments, communication protocols, OS and APIs.
‧ General knowledge of PLC ladder programmes is a plus
‧ Meticulous and quality conscious
‧ Able to work both independently and in a team
__________________________________________________________________
Job Title : Engineer / Senior Engineer (Data/Image/Video Analytics)
Department : Digitalization & Analytics
Vacancies : 1
Hiring Personnel : Lim Chee Wang
Key Responsibilities:
‧ Development of smart manufacturing applications using data analytics,
machine learning and/or AI techniques.
‧ Setting up of software and hardware system to acquire
data/images/videos from production processes, machine and/or
devices/instruments, which will form the data pool for analytics and machine
learning.
‧ Communicate with solution providers / technology partners to carried
out, development, trials and pilot implementation.
‧ Work with other engineers and/or department members to carry out system
integration, testing and delivers effective production improvement
applications.
‧ Provide technical support to Manufacturing & Service for technologies
developed by the team.
Job Requirements:
‧ Bachelor/Master Degree in Computer Engineering/Science, Electrical &
Electronics, Mechatronics Engineering or equivalent
‧ Hands-on experience in data/image/video analytics and development of
machine learning algorithms.
‧ Good programming skill in C++/C#, Python and/or R for data processing
and machine learning development.
‧ Experience in IIoT hardware/software integration, data processing (e.g.
filtering, transformation, FFT), data management (databases) will be an
advantage.
‧ Able to learn independently and adapt rapidly to different programming
environments, communication protocol, OS and APIs.
‧ Meticulous and quality conscious
‧ Able to work both independently and in a team
_________________________________________________________________
INTERESTED APPLICANTS PLEASE SEND YOUR RESUME TO THE HR DEPARTMENT
Mr. Patrick Tan Wee Phin
[email protected]
https://www.makino.com.sg/
--
聯繫人:Mr. Patrick Tan Wee Phin
[email protected]
LIST OF JOB VACANCIES @ MA
Job Title : Technician
Department : Production Assembly
Hiring Personnel : Ng Huai Han
Key Responsibilities:
‧ Ensure the assembled machines are within the company quality standard.
‧ Able to interpret, measure, and troubleshoot electrical circuits and
system.
‧ To install, maintain and troubleshoot pneumatic and hydraulic system.
‧ To route and connect the cables according to quality standard.
‧ Perform good standard cable crimping and soldering.
‧ To operate basic operation of CNC control precision machine.
‧ Ensure that all machine tools are proper taken care and calibrated
‧ Ensure that the standard time set by process engineer is met
‧ Carry out duties in accordance with Quality Policy, EHS control
procedures and WIS
Job Requirements:
‧ NTC2/3/NITEC/ITC or equivalent in Electrical and Electronic/ Mechanical
Engineering
‧ ‘O’ level / SPM with 1 year experience in CNC Machine or related
electrical experience may be considered
‧ Have basic analysis and troubleshooting skill of hydraulic, pneumatic
system / electrical circuit diagram
Job Title : Engineer
Department : Production Engineering
Vacancies : 1
Hiring Personnel : Chow Ji Feng
Key Responsibilities:
‧ Productivity improvement through process and automation design
‧ Design of electrical assembly process: MBOM, process manual, check
sheet, fixture, tooling
‧ Prepare and structure Engineering BOM to Process BOM for assembly
purpose
‧ Investigate and provide report due to part failure
‧ Implement preventive actions to improve quality
‧ Design and Develop simulator and testing jig for function checks
‧ Support Production in documentation, clarification, training and
troubleshooting
Job Requirements:
‧ Candidate must possess at least a Diploma in Engineering or equivalent
‧ Candidate with automation design and manufacturing process experience
are welcome to apply
‧ Good sense of engineering design, analysis and engineering logical
judgement
‧ Should be a good team player and quick learner
Job Title : Automation Engineer
Department : Production Engineering
Hiring Personnel : Chow Ji Feng
Key Responsibilities:
‧ Identification of new opportunities for automation within the
manufacturing process
‧ Management of a project team (including managing vendors)
‧ Designing new automation equipment or processes
‧ Stimulating and testing these processes or equipment to ensure they
function as desired
‧ Writing reports for senior colleagues outlining new concepts, testing
outcomes and ongoing efficiency
‧ Developing and maintaining clear and accurate documentation of
automation equipment or processes
‧ Staff training where necessary – typically after implementing new
processes or equipment or making changes to existing ones
‧ Troubleshooting automated processes or equipment when errors occur
Job Requirements:
‧ Candidate must possess at least a Degree in Engineering
(Mechanical/Mechatronics) or equivalent. Entry level candidates with relevant
degree can be considered.
‧ Experience in automation is preferred.
‧ Experience in programming new automated components to the manufacturing
process is a plus point.
‧ Should be a good team player and quick learner.
‧ Willing to travel and attach to regional company for short period.
Job Title : Procurement Officer
Department : Purchasing
Vacancies : 1
Hiring Personnel : Low Seow Wah
Key Responsibilities:
‧ In-charge of standard component or sheet metal/fabrication or machining
component procurement
‧ Handling of RFQ and technical query from supplier on technical
specification from supplier
‧ Ability to assess supplier capability and capacity
‧ Visiting suppliers, working closely with QC team on qualifying the
suppliers
‧ Reporting cost saving, rejection replacement status of parts
‧ Coordination with department for internal processing. EG: Painting and
Assembly if required
‧ Negotiate and choose the right price
Job Requirements:
‧ Diploma in Mechanical/Precision/Tool & Die or related Engineering
disciplines
‧ Good technical knowledge in mechanical commodity
‧ A team player, self-motivated and able to work under pressure with a
sense of urgency
‧ Meticulous, independent and positive attitude
‧ Good communication skills
‧ Proficient in Microsoft applications and ERP/SAP systems
Job Title : Electrical Engineer
Department : Research and Development Shared Engineering
Vacancies : 1
Hiring Personnel : Kulkarni Avinash Divakar
Key Responsibilities:
‧ Electrical and mechatronic design
‧ 3D layouting of cabinets and electrical subassemblies
‧ circuit diagrams/ cable-drawing creation for manufacturing and assembly
‧ creation of bill of materials and Engineering Changes
‧ Analysis and support on customer service issues
‧ Analysis and support on production issues
‧ Proposal design for new electrical unit for next generation machines
‧ Knowledge of PLC based electrical cabinet design
‧ Engineering and design for customer specific solutions
‧ solve engineering problem at our customer sites
Job Requirements:
‧ Electrical and Mechatronics design
‧ 3D layouting of cabinets and electrical subassemblies
‧ circuit diagrams/ cable-drawing creation for manufacturing and assembly
‧ creation of bill of materials and Engineering Changes
‧ Analysis and support on customer service issues
‧ Analysis and support on production issues
‧ Proposal design for new electrical unit for next generation machines
‧ Knowledge of PLC based electrical cabinet design
‧ Engineering and design for customer specific solutions
‧ solve engineering problem at our customer sites
_____________________________________________________________________________________________________
Job Title : Software Engineer
Department : Design & Development EDM
Vacancies : 2
Hiring Personnel : Jason Wan
Key Responsibilities:
‧ Responsible for developing Makino’s next generation controller and
related products
‧ Responsible for programming in both user interface design and machine
logic.
‧ Understanding the requirements, design, implementation, integration,
testing, verification and maintenance of Makino’s software products
‧ Be accountable for optimization-focused design that practices well
written codes that are easily readable, highly reusable and modular. Coding
convention and design tools will conform to Makino’s software standard
practices.
‧ Provide technical design documentation that fully defines all
application codes and the underlying methodology for each design decisions
made.
‧ Perform troubleshooting of client problems both remotely and onsite.
Overseas travel may be required.
Job Requirements:
‧ Degree in Software Engineering or Computing
‧ Able to program in WPF, C#, C++\
‧ Be familiar with at least two of the following languages: WPF, C#, C++,
Java, Javascripts, and XML.
‧ Have good knowledge in OOD/OOP design and are able to incorporate them
into their designs.
‧ Experience in the following tools will be preferred: Visual Studio,
Expression Blend, Adobe Photoshop, Solidworks 3D and SQLServer.
‧ Have keen interests in system testing
_________________________________________________________________________________________________________
Job Title : Senior / Software Engineer
Department : Design & Development Milling
Vacancies : 1
Hiring Personnel : William Goh
Key Responsibilities:
‧ Responsible for developing and maintaining Windows based applications
for PC, Mobile devices and Makino proprietary products.
‧ Manage requirements, deliverables and schedule, ensuring clear
communication internally and with customers based on SCRUM methodology.
‧ Setup where required, tools and systems to facilitate track and improve
team communication and efficiency.
Job Requirements:
‧ Engineering Graduate in IT / Computer Science
‧ Knowledge of C#, WEB, WPF, Winform application development.
‧ Experience in Windows Embedded Standard OS.
‧ Experience in software architecture design and software unit testing.
‧ Experience in developing interfaces to SAP.
‧ Experience managing software teams using agile scrum development
techniques and tools.
‧ Good knowledge of software development life cycle, object orientated
design and UML diagram design.
‧ Experience in the following tools: Git source control, Visual Studio,
SQLServer, MongoDB, Jenkins CI.
_________________________________________________________________________________________________________
Job Title : Assistant Engineer / Engineer
Department : DM Application
Vacancies : 2
Hiring Personnel : Daniel Nauer
Key Responsibilities:
‧ Conduct basic operation training for customers.
‧ Execute test cuts to support sales
‧ Support customers in the usage of their machines after installations
‧ prepare, document and conduct technical seminars
‧ conduct internal trainings to colleagues from other regions and
departments
‧ prepare process analysis and optimization strategies
Job Requirements:
‧ Diploma in Precision Engineering, Mechanical Engineering or similar or
Higher Nitec with 2 years industry experience involving machining or
experience as application engineer
‧ Ability to converse/write in mandarin is a plus
‧ Knowledge of 5 axis milling application and programming is a plus
‧ knowledge of operation of WEDM is a plus
_________________________________________________________________________________________________________
Job Title : Engineer (Industrial IoT)
Department : Digitalization & Analytics
Vacancies : 1
Hiring Personnel : Lim Chee Wang
Key Responsibilities:
‧ Carry out development in Sensor-Based Industrial IoT implementation for
Production Operation
‧ Source, evaluate and select suitable sensors or tracking technologies
to achieve effective Production Improvement applications
‧ Develop sensor software interface, data processing and algorithm to
realize operational objectives
‧ Work with other engineers and or department members to carry out system
integration, testing and delivers effective production improvement
applications
‧ Provide technical support to Manufacturing & Service for technologies
developed by the team
Job Requirements:
‧ Bachelor/Master Degree in Computer Engineering/Science, Electrical &
Electronics, Mechatronics Engineering or Equivalent
‧ Practical experience in working with any type of sensors (such asRFID,
iBeacon, UWB, Proximity, Accelerometers, etc) implementation.
‧ Familiar with IIoT protocol (OPC-UA, MQTT, Zigbee)
‧ Good Programming skills in (C#, NET, Python) and knowledge in network/
internet related programming (TCP/IP, HTTP)
‧ Familiar with various structured and unstructured data formats (XML,
JSON, CSV etc)
‧ Experience with various type of databases (SQL and NoSQL)
‧ Development experience in Industrial IoT, Data analytics and or other
cloud functionalities (Azure/ AWS) will be an advantage
‧ Able to learn independently and adapt rapidly to different programming
environments, communication protocols, OS and APIs.
‧ General knowledge of PLC ladder programmes is a plus
‧ Meticulous and quality conscious
‧ Able to work both independently and in a team
__________________________________________________________________
Job Title : Engineer / Senior Engineer (Data/Image/Video Analytics)
Department : Digitalization & Analytics
Vacancies : 1
Hiring Personnel : Lim Chee Wang
Key Responsibilities:
‧ Development of smart manufacturing applications using data analytics,
machine learning and/or AI techniques.
‧ Setting up of software and hardware system to acquire
data/images/videos from production processes, machine and/or
devices/instruments, which will form the data pool for analytics and machine
learning.
‧ Communicate with solution providers / technology partners to carried
out, development, trials and pilot implementation.
‧ Work with other engineers and/or department members to carry out system
integration, testing and delivers effective production improvement
applications.
‧ Provide technical support to Manufacturing & Service for technologies
developed by the team.
Job Requirements:
‧ Bachelor/Master Degree in Computer Engineering/Science, Electrical &
Electronics, Mechatronics Engineering or equivalent
‧ Hands-on experience in data/image/video analytics and development of
machine learning algorithms.
‧ Good programming skill in C++/C#, Python and/or R for data processing
and machine learning development.
‧ Experience in IIoT hardware/software integration, data processing (e.g.
filtering, transformation, FFT), data management (databases) will be an
advantage.
‧ Able to learn independently and adapt rapidly to different programming
environments, communication protocol, OS and APIs.
‧ Meticulous and quality conscious
‧ Able to work both independently and in a team
_________________________________________________________________
INTERESTED APPLICANTS PLEASE SEND YOUR RESUME TO THE HR DEPARTMENT
Mr. Patrick Tan Wee Phin
[email protected]
https://www.makino.com.sg/
--
Tags:
海外工作
All Comments
Related Posts
如何在英國找到工程師的工作?(概念篇)
By Frederic
at 2018-11-05T14:32
at 2018-11-05T14:32
紐約105k vs VA richmond 90K
By Rosalind
at 2018-11-03T18:39
at 2018-11-03T18:39
給板上po幫忙內推文的好心板友的提醒
By Una
at 2018-10-25T13:54
at 2018-10-25T13:54
機械工程師德州台塑下游Lolita, TX
By Olivia
at 2018-10-16T00:42
at 2018-10-16T00:42
職業分享明信片計畫
By Wallis
at 2018-10-13T20:10
at 2018-10-13T20:10